ModMax SINTER FORGED I-Beam rods are great for a mild upgrade over stock connecting rods. They feature cap screw bolts, are sinter forged for higher strength than standard factory rods and have bronze bushings for full floating pins. These rods will fit all 4.6 2V, 3V, 4V, and Coyote 5.0 11-Present engines as a true bolt in design.

Note: These rods are rated for approximately 500 flywheel horsepower, however with a safe tune we have had people use them up to 750hp.

Part Number	Length	Big End Bore	Big End Width	Pin End Width	Pin Bore	Gram Weight
650-25159	5.933"	2.239"	.940"	.940"	.8671"	619g

Torque specs for these rods with light engine oil are:
•Stage 1: Tighten to 20 Nm (177 lb-in).
•Stage 2: Tighten to 38 Nm (28 lb-ft).
•Stage 3: Tighten an additional 105 degrees.