New 5.0 Short Block built for naturally aspirated or boosted power that will support up to 1200 horsepower is now available! These are a pre configured short block that we will try to keep in stock for quick delivery at an affordable price. If you would like something custom, please contact us directly for a special quote.

Each short block is hand assembled and machined to insure quality. The blocks are precision honed for proper piston to wall clearance, checked and cleaned before assembly. The rotating assemblies are completely internally balanced to racing specifications and then meticulously assembled into the block. Bearing clearances are checked and set for performance use and the rings are perfectly filed to fit for optimum seal. ARP main studs and side bolts are used and then the blocks are line honed for a perfect crank bore as studs change the roundness of the main saddles.

Each 1200 HP GEN 3 Block features the following:

New GEN 3 Coyote Aluminum block with STANDARD bore size
Mahle GEN 3 Forged 2618 12:1 Compression Ratio Domed Pistons
Mahle HARD ANODIZED top ring groove
Mahle .177" wall Heavy Duty Piston Pins
Mahle Nitrided Steel Ring set 1mm/1mm/2mm
Callies H-Beam 4340 Rods with 7/16" bolts ARP2000
ARP Main Studs and Side Bolts
Forged Ford Coyote crankshaft
High Performance Narrowed rod and main bearings
New Plugs and Dowel Pins
Oil Squirter Delete plugs installed

TECH NOTES:
These blocks will require the use of 12mm Head Bolts or Head Studs
Can use GEN1, GEN2, GEN3, or GT350 Heads with the corresponding head gasket
Timing components must match the cylinder heads used
GEN 3 style oil filter adapter required

NOTE: THESE SHORT BLOCKS ARE PRE BUILT AS A STOCKING ITEM. If you have special needs, options, or time frame you must CONTACT us BEFORE ordering. All sales on Short Blocks are FINAL.